Decoration Lamp
Take a wooden ply piece of dimension 190mm x 120mm x 19mm and cover it with laminates.
Take another 3 piece of dimension (270mm x 100mm x 19mm) x 2 and 290mm x 60 mm x 5mm plyboard.
Take 5mm thickness plyboard and sandwich it between 19mm thickness board. Keep some space around it as the 5mm plyboard is small in width.
Now, Take the sandwich piece and laminate it on both side.
Take smaller piece (190mm x 120mm ) and drill three holes - Two for screw and One for Wire to pass through.
Joint the upper part with lower part. For cleaness apply paint to corner for better look.
The grove left is for led strip (12 volts). Pass the wire through the hole we left, and cover 3/4 side with led strip.
Finished Product.
Comments
Post a Comment